How do I fix the oven if it's reading F31 everytime I puse bake on my Frigidaire stove
The Kenmore range F31 error is a error caused by the temperature sensor. It means the temperature sensor is shorted. Check the wiring from the sensor to the sensor plug at the main control board and make sure its good. If the wiring checks out test the resistance of the sensor with a ohm meter at room temperature it should not be under 500 ohms if so its bad. If the wiring and sensor check out ok replace the main control board. Troubleshooting and repair instructions are the same for this error as for the Kenmore Range F10 error which are linked below.
Troubleshooting And Repair Instructions For Kenmore Range F31 Error
This Kenmore Range F31 error troubleshooting and repair information applies to model 79094002600 and all the models listed under the related models section below.
How do I fix the oven if it's reading F31 everytime I puse bake on my Frigidaire stove
See the F31 error information page below. If you want model specific information such as parts you will need to post a new question contaning the full model number of your range.
https://www.appliancecodes.com/kenmore-range-f31-error-info-4-32/
I ordered the temperature sensor replacement and had it put in. I'm still getting the F 31 error when I turn my oven on. Rachel
If you replaced the sensor and still get the F31 error then the main control is bad. I can't give you the correct part information without the model number so if you need the part information post a new question with your full model number stating that you need the part number for the control board.
Is this expensive to repair? Should I buy a new stove/oven?
The F31 error is just a shorted temperture sensor. It's a cheap repair and not worth replacing the stove for. The sensor you need can be ordered from the link below.
The page linked below shows how to access the sensor.
https://www.appliancecodes.com/repairs/how-to-troubleshoot-and-fix-kenmore-range-f10-error/
Have a question about this error code?
Fill out the form and a certified
appliance technician will answer your question usually within 24 hours. You will be notified by email once your question is answered. Questions not
related to this error will not be answered. Find the error you need help with in our database. If it's not in our database submit it on our code info request page.