The Kenmore range F30 error is a error caused by the temperature sensor. It means the temperature sensor is open so there is a open circuit between the control and the temperature sensor. Check the wiring from the sensor to the sensor plug at the main control board and make sure its good. Check the resistance of the temperature sensor with an ohm meter if the sensor shows under 500 ohms at room temperature its bad. If the wiring and sensor checks out replace the main control board. Troubleshooting and repair instructions are the same for this error as for the Kenmore Range F10 error which are linked below.
Troubleshooting And Repair Instructions For Kenmore Range F30 Error
This Kenmore Range F30 error troubleshooting and repair information applies to model 79094002600 and all the models listed under the related models section below.
Have a question about this error code?
Fill out the form and a certified
appliance technician will answer your question usually within 24 hours. You will be notified by email once your question is answered. Questions not
related to this error will not be answered. Find the error you need help with in our database. If it's not in our database submit it on our code info request page.