Went to turn the broiler on and got a f13 error. Shut the breaker, when turned back on the oven worked but not the broiler. I have a Kenmore elite model 790.46613500.
The Kenmore range F13 error means Bad EEPROM Identification/Checksum error. This means the logic chip in the main control can't communicate with the memory (eeprom). The only way to try and fix this error is to reset the control by turning off the power to the range at the breaker or unplugging it for one minute. Restore power and if the F13 error continues you will need to replace the main control board to repair the range. The replacement board part number, order information and instructions to replace it can be found at the link below.
Click Here For Control Board Ordering Information
This Kenmore Range F13 error troubleshooting and repair information applies to model 79094002600 and all the models listed under the related models section below.
Went to turn the broiler on and got a f13 error. Shut the breaker, when turned back on the oven worked but not the broiler. I have a Kenmore elite model 790.46613500.
That error is a failure code for the logic chip in the main control board. The only thing you can do is to try and reset the control board by killing power to the range by either unplugging it or killing power to at the breaker on your home. Leave it off for at least 5 full minutes and restore power. If after that the problem persists you will need to replace the control board. If the code is no longer coming up but the broiler is not working then someone will need to use a volt meter and test for voltage at the broil element to see if it's getting voltage from the control board. If it's not the relay on the control for the broil has failed and the board needs replacing. If the element is getting voltage and not working the broil element needs to be replaced. The part number for the control board you need for that model is 316418780.
I have a Model 790.96212403 Serial VF50251964 glass top range and was going to bake today. When I tried to set temperature for preheat, this code came up.
The F13 error is a internal failure code of the main control board. The only thing you can do is try and reset the electronics by killing power to it at the breaker/fuse panel on your home for one full minute then restore power. If after that the problem persists the main control board will have to be replace to fix the range. The control board you need can be ordered from the link provided below.
Sorry for the bad news.
Happy Holidays.
Hello Please quote a EOC for this unit 790.90214011. Stove
The electronic contol you need for that model is linked below:
https://prismparts.com/products/frigidaire-range-electronic-oven-control-pp8377854
Have a question about this error code?
Fill out the form and a certified
appliance technician will answer your question usually within 24 hours. You will be notified by email once your question is answered. Questions not
related to this error will not be answered. Find the error you need help with in our database. If it's not in our database submit it on our code info request page.